 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Product Data Sheet 3.0 WATT MINIATURE SIP DC/DC CONVERTER HPR2XX FEATURES ! ! ! Four Channels Of Isolated Power High Output Power Density: > 9. 4 Watts/Inch3 Extended Temperature Range: -25C To +85C High Efficiency: To 84% Low Cost ! High Isolation Voltage: 750V Continuous Input-to-Output and Channel-to-Channel Single In-line Package (SIP) Internal Input and Output Filtering Non-Conductive Case ! ! ! ! ! The HPR2XX Series is designed for multiple channel applications that require small size and could benefit from a complete onepackage solution. The HPR2XX Series offers four isolated channels of output power in a footprint less than the size of many singular devices. This unregulated series of DC/DC converters provides three watts of total output power. Each isolated channel can supply up to 750mW. The HPR2XX Series uses advanced circuit design and packaging technology to realize superior reliability and performance. With only one switching converter on the board, the HPR2XX eliminates the possibility of separate converters creating beat frequencies, or "aliasing" in multiple channel applications. The high efficiency of the HPR2XX Series means less internal power dissipation than comparable solutions. With reduced heat to dissipate, the HPR2XX Series can operate at higher temperatures with no degradation in reliablility. In addition, the high efficiency of the HPR2XX Series provides greater than 9 watts/inch3 output power density. The HPR2XX Series offers the user low cost without sacrificing reliability. The use of surface mounted devices and manufacturing technologies make it possible to offer premium performance and low cost. MECHANICAL 2.210+.010 (56.13) PIN CONNECTIONS 1. -VOUT1 5.-VOUT2 0.340+.010 (8.64) 2. COM 1 6. COM2 3 +VOUT1 7.+VOUT2 9. +VIN 14. -VOUT3 18. -VOUT4 19. COM 4 10.-VIN 15. COM3 TOP VIEW 16. +VOUT3 20. +VOUT4 0.340+.010 (8.64) FRONT VIEW 0.030+.010 (0.76) 0.020+.002 (0.51) 0.400+.010 (10.16) RIGHT SIDE VIEW 0.140+.020 (0.25) 0.010+.002 (0.25) 0.050+.015 (1.27) 0.155+.015 (3.94) BOTTOM VIEW 12 3 5 67 9 10 14 15 16 18 19 20 All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) PIN PLACEMENT TOLERANCE: 0.015" Marked with: specific model ordered, date code, and job code. Internet: http://www.cdpowerelectronics.com Power Electronics Division, United States 3400 E Britannia Drive, Tucson, Arizona 85706 Phone: 800.547.2537 Fax: 520.770.9369 HPR2XX REV D 4/99 Power Electronics Division, Europe C&D Technologies (Power Electronics) Ltd. 132 Shannon Industrial Estate, Shannon, Co. Clare, Ireland Tel: +353.61.474.133 Fax:+353.61.474.141 Page 1 ELECTRICAL SPECIFICATIONS Specifications typical at TA = +25C, nominal input voltage, rated output current unless otherwise specified. NOMINAL INPUT VOLTAGE MODEL HPR203 HPR204 HPR205 HPR210 HPR211 HPR216 HPR217 HPR221 HPR223 (VDC) 5 5 5 12 12 15 15 24 24 RATED OUTPUT VOLTAGE (VDC) 5.2 12 15 12 15 12 15 5.0 15 RATED OUTPUT CURRENT (mA) 73 30 25 30 25 30 25 75 25 INPUT CURRENT NO LOAD (mA) 70 75 75 30 30 20 20 20 20 RATED LOAD (mA) 820 750 750 305 300 240 240 170 155 REFLECTED RIPPLE CURRENT (mAp-p) 35 35 35 15 15 15 20 20 20 EFFICIENCY (%) 74 80 80 82 84 83 84 74 81 Note: Other input to output voltage options may be available. Please consult factory. Specifications typical at TA = +25C, nominal input voltage, rated output current unless otherwise specified. PARAMETER INPUT Voltage Range CONDITIONS MIN 4.5 10.8 13.5 21.6 At Startup Input to Output, Channel to Channel 60 Hz, 10 seconds 750 750 10 30 4 3 750 Rated Load, Nominal VIN BW = DC to 10MHz BW =10Hz to 2MHz IL=1mA, VOUT = 5V IL=1mA, VOUT = 12V IL=1mA, VOUT = 15V 5 40 7 8 17 20 .05 High Line to Low Line Rated Load to 1mA Load Rated Load to 1mA Load 1 10 3 300 7 5 20 1.8 450 270 45 TYP 5 12 15 24 MAX 5.5 13.2 16.5 26.4 1 UNITS VDC VDC VDC VDC V/sec Amps VDC Vpk G pF Arms W mW % mVp-p mVrms VDC VDC VDC %/Deg C %/%VIN % % kHz g % % MHr kHr kHr kHr COMMON SPECIFICATIONS Voltage Rise Time In Rush Current ISOLATION Rated Voltage Test Voltage Resistance Capacitance Leakage Current OUTPUT Total Rated Power Rated Power Each Channel Voltage Setpoint Accuracy Ripple & Noise Voltage VISO= 240VAC, 60Hz Temperature Coefficent REGULATION Line Regulation Load Regulation (5V out only) Load Regulation (All other Models) GENERAL Switching Frequency Package Weight Frequency Change MTTF per MIL-HDBK-217, Rev. E Ground Benign Fixed Ground Naval Sheltered Airborne Uninhabited Fighter TEMPERATURE Specification Operation Storage Rated Load to 1mA Load High Line to Low Line Circuit Stress Method TA = +25C TA = +35C TA = +35C TA = +35C -25 -40 -40 +25 +85 +100 +110 C C C ABSOLUTE MAXIMUM RATINGS Internal Power Dissipation............................................................................1.2W Short Circuit Protection.......................................................................< 1 second Lead Temperature (soldering, 10 seconds max)......................................+300C ORDERING INFORMATION HPR 2XX /H Device Family HPR Indicates DC/DC Converter Model Number Selected From Table Above Screening Option HPR2XX REVD 4/99 Page 2 TYPICAL PERFORMANCE CURVES Specifications typical at TA = +25C, nominal input voltage, rated output current unless otherwise specified. FREQUENCY vx VIN 400 Frequency (kHZ) FREQUENCY vs Pout 420 High Line CROSS REGULATION HPR205 Channels 2-4: +25mA Load 31.0 30.5 30.0 29.5 29.0 Channel 2-4 Channel 1 Frequency (kHZ) 350 325 300 360 330 300 Nominal Line Low Line 4.5 4.75 5.0 Vin (VDC) 5.25 5.5 +VOUT (VDC) 375 390 0 .75 1.5 2.25 3.0 0 6 12 18 26 Pout (Watts) LOAD REGULATION (12 Vout Models) Input Channel 1 (mA) LOAD REGULATION (15 Vout Models) LOAD REGULATION (5 Vout Models) 6.6 6.2 VOUT (VDC) 14.0 13.4 VOUT (VDC) VOUT (VDC) 16.00 15.75 15.50 15.25 15.00 5.8 5.4 5.0 12.8 12.2 11.6 0 20 40 60 80 0 8 16 24 32 -0 6.25 12.50 18.75 25 Iout (mA sum of all Outputs) REFLECTED RIPPLE CURRENT vs. Pout Reflected Ripple Current (mA p-p) Iout (mA sum of all Outputs) EFFICIENCY vs OUTPUT POWER 90.0 Efficiency (Pout/Pin) Change from Nom Vout (%) +15Vout +12Vout +5Vout Iout (mA sum of all Outputs) LINE REGULATION 12 6 0 -6 50.0 37.5 25.0 12.5 0 67.5 45.0 22.5 0 -12 0 0.8 1.7 2.6 3.4 0 .85 1.7 2.6 3.5 -10 -5 0 Pout (Watts) 5 10 Pout (Watts) Pout (Watts) The information provided herein is believed to be reliable; however, C&D TECHNOLOGIES assumes no responsibility for inaccuracies or omissions. C&D TECHNOLOGIES assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. C&D TECHNOLOGIES does not authorize or warrant any C&D TECHNOLOGIES product for use in life support devices/systems or in aircraft control applications. HPR2XX REV D 4/99 Page 3 |
Price & Availability of HPR2XX
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |